]> Product Specifications - Ecobliss Blisterproducts

Ecobliss Webshop Product Specifications

Product Specifications

Via the links on this page, you can find the product specifications of all the products categories available through our webshop. If you have any further questions, please contact us.

 

1/5 Stock blisters


Material


PET-GAG

Description
Polyethylene terephthalate (PET) is a thermoplastic polymer resin of the polyester family. It is one of the most important raw materials used in man-made fibers. PET-GAG is a three layer PET variant suitable for welding.

Properties
  • transparent
  • recyclable; resin identification code 1
  • suitable for heat sealing and high frequency welding
  • printable; please go to the Ecobliss monoblister website for printed clamshell blisters

Thicknesses used for clamshell blisters
The material thicknesses used for the blisters in the standard blister program are: 0,3mm; 0,4mm; 0,5mm and 0,6mm.
The actually applied thickness per product code depends on the size and the shape of the blister ensuring suitable strenght.

 

Blister dimensions

Generic drawing for a clamshell blister:

Generic drawing for a Clam Shell blister

A: Package Outer Dimension Width
B: Package Outer Dimension Length
C: Base Width
D: Base Length
E: Blister Cavity Width
F: Blister Cavity Length
G: Blister Cavity Depth

 

Remarks:

  • For all categories the base is 5mm deep and positioned at 5mm from the bottom and 20mm from the top of the Blister Package.
  • The maximum blister Cavity Depth is dependent on Cavity Width and Cavity Length in combination with material thickness.

Customised Blisters:

  • the maximum available area is limited by the Base dimensions and for some Categories is even just a bit tighter to ensure a good strength.
  • The maximum available height is dependent on the shape of the Blister Cavity in combination with the material thickness.
  • Within the available room all technically feasible Customised shapes are possible.

 

Blister Quality

Surface: clear Remark: a few blister codes with more extreme shapes may show forming lines and or mat areas. In these cases Ecobliss has chosen for blister strength above surface clearity. Maximum registration deviation unfolded: ±0,5mm.

 

Blister closing mechanism

All blisters have multiple closing tabs that combined ensure a good closure. As the closing mechanism has not been designed for repeated opening and closing this may lead to some mechanical deformation.

Options for secure or anti-theft closing are High Frequency weld, heat seal, staples and sticker label (containing product or price info). For more information or advice please contact us.

Packaging


The stock blisters are stacked and whenever possible the stacks are packed horizontally so the blisters do not get stuck together. The blisters are packed inside a transparent plastic bag for extra protection which is placed in a corrugated board outer box. The outer boxes have an identification label on the outside.

For more information or advice, please contact us.


2/5 Stock PET boxes


Material


PET-A


Pet box dimensions


Generic drawing of a clamshell blister:
A: PET box Width
B: PET box Height
C: PET box Depth

Remark:

  • PET box dimensions are inner dimensions
  • For the bag-type boxes, the Depth is the Depth at the bottom of the box.


Quality


Surface: clear
Note: all PET boxes come with a transparent protective sheet to minimise the risk of scratches during transport and handling. This protective sheet needs to be removed before using the boxes. In this respect, Ecobliss has given priority to blister quality.


Closing mechanism


All PET boxes have a tuck-in cover. Most of the PET boxes have an auto lock bottom. Except for the very shallow boxes, they also have a tuck-in bottom. A few boxes are designed to be used with the openings on the left and right side instead of on the bottom and cover. These boxes have a tuck-in closing mechanism on both sides.


Packaging


PET boxes are transported and delivered in plano. Plano PET boxes are packed in bundles of a certain number of boxes. The quantity per bundle depends on the size of the box and thus varies per Product Code. The bundled PET boxes are packed inside a transparent plastic bag for extra protection which is placed in a corrugated board outer box. The outer boxes have an identification label on the outside.


3/5 Stock blister inserts and stock PET box interiors


Material


Type of paper:Machine Coated
Grammage:300 grams / square metre
Printing:offset; single sided or double sided
# colours:1/2/3/4 colours per side (C, M, Y, K or PMS)

Dimensions


The dimensions of the stock blister insert cards are the base dimensions minus 2 mm (Base Width minus 2 mm; Base Height minus 2 mm).

The dimensions of the PET box interior are such that the interior fits into the box nicely and easily.


Quality


High-quality offset printing and high-quality die cutting. If requested or advised, press varnish or even UV varnish is possible.


Packaging


Stock blister inserts and PET box interiors are packed in corrugated board outer boxes with an identification label on the outside of the outer box.


4/5 Alarm tags


AM labels

Label specifications
Length:45.21 mm ± 0.5 mm (1.78” ± 0.020”)
Width:10.67 mm ± 0.5 mm (0.420” ± 0.020”)
Thickness (incl. liner):maximum 2.00 mm (0.079”)
Sheet specifications
Labels per sheet:108 labels
Outer box specifications
Sheets per box: 5000
Box gross weight: 2.76 kg (6.07 lbs.)
Dimensions:27.9 x 20 x 11 cm (11 x 8 x 4.5”)

RF labels


Label specifications
Antenna Size:30 x 30 mm
Resonance Frequency:8.2 MHz (± 4%)
Quality Factor:Q≧60
Deactivation Field strength:2.0 A/m - 3.5 A/m
Roll specifications
Quantity per Roll (standard):1000
Cardboard Core inner Diameter:76.2 mm
Outer box specifications
Rolls per box:20
Gross weight:9.2 kg
Dimensions:37 x 31.5 x 16.5 cm

5/5 Sealing device


Data sheet

(link to other page)

Technical specification

(link to other page)

Print view